Sun Fire X4600 M2 Hardware Specifications

Processor

Processor2, 4, 6, or 8 AMD Opteron Processor 8000 Series, upgradeable to quad-core
CPU InterconnectHyperTransport speed: 1GHz, 8 GB/second
Cache1 MB Level 2 per core

Main Memory

DIMMs8 or 4 DIMM slots per CPU socket, choice of 1 GB, 2 GB, and 4 GB DDR2/667 ECC registered DIMMs
2.4 Ghz, 4 DIMM slots per processor
2.6 Ghz, 4 DIMM slots per processor
2..8 GHz, 4 or 8 DIMM slots per processor
Standard configurations8 GB and up to max 256GB

Standard/Integrated Interfaces

On-board Gigabit EthernetFour 10/100/1000Base-T Ethernet ports, RJ-45 connectors, with support for teaming and failover
Network managementAdditional dedicated 10/100Base-T Ethernet port, RJ-45 connector
SerialRS-232 Serial Interface, RJ-45 Connector
SASFour channel SAS interface
USBTwo USB 2.0 ports (front)
Two USB 2.0 ports (rear)
Expansion bus8 low profile PCI expansion slots:
6 PCIe slots (4 x 8-lane PCIe slots, 2 x 4-lane PCIe slots
2 64-bit/100 MHz PCI-X slots

Mass Storage

Hard DiskUp to four hot-swappable, 2.5-inch SAS internal disks
Internal DVD-ROMStandard DVD-ROM in every server

Remote Management

Service processorILOM built-in - managed the same way as other Sun Fire x64 servers
In-band managementIPMI v2.0 via KCS driver
SNMP OS-resident agent
Out-of-band managementIPMI v2.0, DMTF CLI, SNMP- v1, v2c, v3, Web GUI, SSH
Remote management featuresRemote Keyboard, Video, Mouse (KVM), Remote media functionality, Remote power control remote access to BIOS, remote FRU status, monitoring. Logging, role-based access control
System management pathsA dedicated 10/100BaseT Ethernet port, an RJ-45 serial port

Software

Operating environmentSolaris, Red Hat Enterprise Linux, Microsoft Windows, and VMware
ManagementCLI (in-band and out-of-band), IPMI 2.0 (in-band and out-of-band), SNMP (out-of-band only)

Power Supplies

Power suppliesFour hot-swappable power supplies, redundant in 2+2 configuration, 850 W each, 83% efficiency, or 950W each, 89% efficiency
Power source100 - 240 VAC - 50/60 Hz input
UL maximum (DC output)850 W/PSU or 950W/PSU (max output)

Environment

AC powerAC power 100 - 240 VAC (47-63Hz)
Operating temperature/humidity (single, non-rack system)5 degrees C to 32 degrees C (41 degrees F to 90 degrees F), 10% to 90% relative humidity, non-condensing, 27 degrees C max wet bulb
Storage temperature (single, non-rack system)-20 to 60 degrees C (-4 to 140 degrees F)
Humidity20% to 90% non-condensing
Operating Altitude (single, non-rack system)Up to 3048 m, maximum ambient temperature is derated by 1 degree C per 300 m above 900 m
Non-Operating Altitude (single, non-rack system)Up to 12000 m

Acoustic Noise Emissions

NotesDeclared noise emissions in accordance with ISO 9296, A-weighted,operating and idling.
LwAd (1B = 10dB)At or below 25C: 8.1 B
At max ambient: 8.9 B
LpAm bystanderAt or below 25C: 66 dB
At max ambient: 74 dB

Regulations

NotesMeets or exceeds the following requirements:
SafetyIEC60950, UL/CSA60950-1, EN60950, CB Scheme with all country differences
RFI/EMIFCC Class A, Part 15 47 CFR, EN55022, CISPR 22, EN300-386:v1.3.2, ICES-003
ImmunityEN55024,EN300-386:v1.3.2
CertificationsSafety: cULus Mark, CE Mark, CCC, GOST R, S-Mark EMC: CE Mark (93/68/EEC), Emissions and Immunity Class A Emissions Levels: FCC, VCCI, C-Tick, MIC, *CCC, *GOST R, *BSMI
*Applicable at GA
OtherLabeled per Waste Electrical and Electronic Equipment (WEEE) Directive

Dimensions and Weight

Height176 mm (6.92 in.)
Width432 mm (17.0 in.)
Depth609 mm (24 in.)
Weight125 lbs / 56.7 kg