Processor Options | Number | Up to two dual-processor CPU/Memory Boards (2 or 4 CPUs) |
| Architecture | 900-MHz, 1050-MHz, or 1200-MHz UltraSPARC III Cu |
| Cache memory | 64-KB data and 32-KB instruction |
| Secondary: 8-MB external |
Main Memory | Capacities | 8 memory slots (DIMMs) per processor, 16 total slots per CPU/Memory Board |
| 256-MB, 512-MB, or 1-GB expansion (16GB maximum per CPU/Memory board, 32GB maximum when configured with 4 processors) |
| Note: Install DIMMs in groups of four. 1050MHz & faster CPU/Memory boards require that all memory DIMM slots be fully populated. |
Standard Interfaces | Ethernet | Two 10/100/1000BASE-T twisted-pair ethernet ports (RJ-45) |
| FC-AL | One Fibre Channel Arbitrated Loop (FC-AL) high-speed serial data connector (HSSDC) |
| Keyboard and mouse | USB |
| PCI | Six PCI slots compliant with PCI specification Revision 2.1: |
| Two slots (0 & 1) operating at 66-MHz, 64 bits wide, 3.3 volts (full length slots) |
| One slot operating at 33-MHz, 64 bits wide, 5 volts (full-length slot) |
| Three slots operating at 33-MHz, 64 bits wide, 5 volts (short slot) |
| Remote System Controller | One RSC card plugs into a dedicated slot on the system I/O board which includes integrated modem, serial and Ethernet interfaces. |
| One 56 Kbps modem port (RJ-11) |
| One EIA-232D serial port (RJ-45) |
| One 10 Mbps Ethernet port (RJ-45) |
| Serial | One RJ45 serial port |
| USB | Two standard Universal Serial Bus (USB) Type A connectors |
Internal Mass Storage | Disks | Two front-accessible, hot-swappable, FC-AL disks, 36-GB, 73-GB or 146-GB, 3.5-in. x 1.0-in. 10,000 RPM |
| DVD-ROM | 8x DVD-ROM (IDE) drive |
Power Supplies | Type | One required, two for N+1 redundancy (hot swap), each with independent power cord |
| Output | 560 W per power supply |
Environment | AC input | 100 - 240 VAC, 50 - 60 Hz, 8.6 A(max) |
| Input power | 1100 W (max) |
| Heat output | 3751 BTU/hr (max) |
| Note: See Infodoc 48623 for more specific details. |
| Temperature | Operating: 5° C to 35° C (41° F to 95° F) |
| Nonoperating: -20° C to 60° C (-4° F to 140° F) |
| Humidity | Operating: 20%to 80% relative temperature humidity, noncondensing |
| Nonoperating: 5% to 95% relative temperature humidity, noncondensing |
| Altitude | Operating: 3000 m (10,000 ft.) |
| Nonoperating: 12,000 m (40,000 ft.) |
| Acoustic noise | Operating: 74.5 dBA |
| Idling: 74.5 dBA |
| Vibration | Operating: .0002 G/Hz, 5 - 500 Hz (random) (deskside) |
| .0001 G/Hz, 5-150 Hz, -12db/octave slope 150-500 Hz (z-axis only) (rackmounted) |
| Nonperating: .002 G/Hz, 5 - 500 Hz (random) (deskside) |
| .001 G/Hz, 5-150 Hz, -12db/octave slope 150-500 Hz (z-axis only) (rackmounted) |
| Shock | Operating: 4G peak, 11 milliseconds half-sine pulse (deskside) |
| 3G peak, 11 milliseconds half-sine pulse (rackmounted) |
| Nonoperating: 15G peak, 11 milliseconds half-sine pulse (deskside) |
| 10G peak, 11 milliseconds half-sine pulse (rackmounted) |
| Number of cords | 2 (max) |
RegulationsMeets or exceeds the following requirements: | Safety | UL 60950, CSA C22.2 EN 60950 (from U.L.), TUV 60950, UL CB scheme IEC 950 (CE mark), GOST |
| RFI/EMI | Class A:Australia/New Zealand AS/NZ 3548, Industry Canada ICES-003, European Community EN55022/CISPR22, Japan VCCI, Taiwan CNS 13438, and US FCC 47CFR15.B |
| Immunity | EN55024, EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-8, EN61000-4-11, IEC 61000-3-2, and IEC 61000-3-3 |
| X-ray | U..DHHS 21CFR Subchapter J,PTB German X-ray Decree |
Dimensions and Weights | Height | 22.2 cm (8.75 in.), 5 Rack Units |
| Width | 44.6 cm (17.5 in.) |
| Depth | 61.0 cm (24.0 in.) |
| Weight | 35.8 kg (79 lb.) (minimum) |
| 44 kg (97 lb.) (fully configured) |
| Power cord | 2.5 m (8.2 ft) |
