Sell Your used Hardware
Request a Quote

Welcome to World Data Products

Used and Refurbished Sun Fire V440 Servers

Request a Quote Each refurbished Sun Fire V440 server goes through World Data Products' rigorous Total Quality Process, comes with a 30-day warranty and qualifies for manufacturer's maintenance. World Data Products also has Sun server repair on-site, so you can extend the lifecycle of your current Sun Fire V440 servers. Get the best value for your money at World Data Products when purchasing used Sun Fire V440 servers and upgrades.

Sun Fire V440 Server Features Image

Processor Options

Number One to four
Architecture UltraSPARC® IIIi (1.062, 1.28, or 1.593 GHz)
Cache memory 64 KB data, 32 KB instruction and 1 MB integrated L2

Main Memory

Capacities 4 DIMM slots per processor
Registered DDR-1 SDRAM
System configurations from 2 GB to 32 GB

Standard Interfaces

Ethernet Two 10/100/1000 BaseT Ethernet
One 10 BaseT Ethernet (network management)
PCI Six internal PCI 2.2 compliant expansion slots:
Three 64 bit 33/66 MHz 3.3V full-length (slots 2, 4, 5)
Three 64 bit 33 MHz 5V full-length (slots 0, 1, 3)
SCSI One Ultra320 SCSI (LVD)
System Configuration Card Front accessible for transfer of system configuration information, including host ID
Serial One TIA/EIA-232-F asynchronous (DB9) Port
One TIA/EIA-232-F (RJ45) Port (management)
USB Four OHCI-1.1 Compliant Interfaces, supporting dual speeds of 12 and 1.5 Mbits/sec each

Internal Mass Storage

Disks Up to four hot plug Ultra320SCSI 36GB, 73GB, or 146GB Disks
DVD-ROM One Slim-line ATAPI DVD-ROM

Environment

AC input 90 - 264 V AC (47- 63 Hz)
Input power 650 W (Max)
570 W (Typical)
Heat output 2218 Btu/hr for operation @ 100 VAC to 240 VAC
Temperature Operating: 5°C to 40°C (41°F to 104°)
Nonoperating: -40°C to 60°C (-40°F to 140°)
Humidity Operating: 20% to 80% relative humidity, noncondensing, 27°C max wet bulb
Nonoperating: Up to 93% relative humidity, noncondensing, 38°C max wet bulb
Altitude Operating: Up to 3000m, maximum ambient temperature is derated by 1°C per 500m above 500m
Nonoperating: Up to 12000m
Acoustic noise Operating: 6.7 Bels
Idling: 6.7 Bels
Vibration Operating: 0.0001 g2/Hz, 5 to 150 Hz, -12db/octave slope 150 to 500 Hz
Nonoperating: 0.001 g2/Hz, 5 to 150 Hz, -12db/octave slope 150 to 500 Hz
Shock Operating: 3.0 g peak, 11 milliseconds half-sine pulse —IEC 60068-2-27
Nonoperating: 15.0 g peak, 11 milliseconds half-sine pulse; 1.0 inch roll-off front to back, 0.5 inch roll-off side to side —IEC 60068-2-27
Handling Drops 60 mm, 1 drop per corner, 4 corners—IEC 60068-2-31
Threshold Impact 0.85m/s, 3 impacts per caster, all 4 casters, 25 mm step-up—ETE
1010-01
Number of cords 2 (max)

Regulations

Meets or exceeds the following requirements

Safety UL approval to UL 60950, EN60950, C22.2 No.60950, and CB Report for IEC 950; all including Amendments 1, 2, 3, 4 and 11 and full worldwide deviations. TUV approval to EN60950/IEC 950. GOST languages Certification for Eastern Block countries. Korean MIC Certification. China CCC mark using UL as agent. CE Declaration of Conformance (SMI self-declaration) to The Electromagnetic Compatibility Directive and Low Voltage Directive with accompanying "Technical Data File". Approval to Argentinian standards using UL as agent.
RFI/EMI 47 CFR 15B (Code of Federal Regulations, Part 15, Subpart B) Class A; EN55022 Class A per EMC Directive 89/336/EEC (CE Mark); VCCI Class A; Industry Canada ICES-003; AS/NZ 3548 (Australia/New Zealand); CNS 13438 (Taiwan); KSC 5858 (MIC Mark/Korea)
Immunity IEC 1000
EN55024 per EMC Directive 89/336/EEC, including
IEC 61000-4-2 Electrostatic discharge immunity test
IEC 61000-4-3 Radiated, radio-frequency, electromagnetic field immunity test
IEC 61000-4-4 Electrical fast transient/burst immunity test
IEC 61000-4-5 Surge immunity test
IEC 61000-4-6 Immunity to conducted disturbances, induced by radio frequency fields
IEC 61000-4-8 Power frequency magnetic field immunity test
IEC 61000-4-11 Voltage dips, short interruptions and voltage variations immunity tests
Line Distortion EN 61000-3-2 per EMC Directive 89/336/EEC
Voltage Fluctuations and Flicker EN 61000-3-3 per EMC Directive 89/336/EEC

Clearance and Service Access

Front 36 in.(91.4 cm)
Rear 36 in.(91.4 cm)

Dimensions and Weights

Height 174 mm (6.85 in.)
Width 440 mm (17.3 in.)
Depth 635 mm (25 in.)
Weight 37 kg (82 lb.) fully configured

 

Click Here for Pricing

Questions? Click Here

Buy, sell and upgrade used and refurbished Sun Fire V440 servers, along with the rest of the Sun server family, at World Data Products.