Used and Refurbished Sun Fire 4810 Servers
Each refurbished Sun Fire 4810 server goes through World Data Products' rigorous Total Quality Process, comes with a 30-day warranty and qualifies for manufacturer's maintenance. World Data Products also has Sun server repair on-site, so you can extend the lifecycle of your current Sun Fire 4810 servers. Get the best value for your money at World Data Products when purchasing used Sun Fire 4810 servers and upgrades.
 |
Sun Fire 4810 Server Features |  |
|---|
Processor Options |
Number | Two to 12 |
| Architecture | UltraSPARC[tm] III: 750MHz | |
| UltraSPARC III Cu (copper based): 900MHz, 1050MHz or 1200MHz | ||
| UltraSPARC IV (SF 4800 only): 1050MHz, 1200MHz, or 1350MHz | ||
| UltraSPARC IV+ (SF 4800 only): 1.5GHz or 1.8GHz | ||
| Cache per processor | UltraSPARC III and III CU: | |
| Primary (L1): 32 KB instruction, and 64 KB data cache | ||
| Secondary (L2): 8 MB, ECC protected | ||
| UltraSPARC IV: | ||
| Primary (L1): 64 KB 4-way data, 32 KB 4-way instruction, 2 KB Write, 2 KB Prefetch | ||
| Secondary (L2): 16 MB external (exclusive access to 8 MB per pipeline), On-chip controller and address tags | ||
| UltraSPARC IV+: | ||
| Primary (L2): 2 MB on-chip | ||
| Secondary (L3): 32 MB off-chip | ||
| CPU interface | Packet-switch crossbar connecting up to 3 CPU/Memory boards, and up to 2 I/O assemblies | |
| System Interconnect | Fireplane, 9.6 GB/sec (at 150 MHz) | |
System Boards |
Number of boards | Maximum of 3 CPU/Memory boards and 2 I/O assemblies |
| CPU/Memory board | Two CPU's with 32 GB (max) Memory or four CPU's with 64 GB (max) memory | |
| PCI I/O Assembly | Eight PCI slots supporting: | |
| 6 full or short cards | ||
| 4 at 33 MHz, 5V (slots 2, 4, 5, 6) | ||
| 2 at 33/66 MHz, 3.3V (slots 3, 7) | ||
| 2 short boards | ||
| 33 MHz, 5V (slots 0 and 1) | ||
| CompactPCI I/O Assembly | Four CompactPCI slots supporting 4-3U cPCI cards | |
| 2 at 33/66 MHz, 3.3V (slot 0 and 1) | ||
| 2 at 33 MHz, 5V (slots 2 and 3) | ||
| PCI-X I/O Assembly | Eight 64-bit PCI-X slots | |
| 6 at 100 MHz | ||
| 2 at 33 MHz | ||
Main Memory |
64 GB memory (max) per 4 CPU's or 32 GB memory (max) per 2 CPU's on a CPU/Memory board | |
| Maximum system memory capacity of 192 GB (3 Ã 64 GB) | ||
| 1GB DIMMs are not supported on 750MHz CPU/Memory boards. | ||
| Note: The UltraSPARC III processor contains an integrated memory controller which is responsible for memory management of local memory and for running diagnostics on the CPU/Memory board. Therefore, memory capacity is directly related to the number of CPU's. | ||
Standard Interfaces |
System Controller | Responsible for the overall control of the system. Each System Controller includes one RS-232/423 (DB25) serial interface and one 10/100BASE-T ethernet/fast ethernet (RJ45) interface. Dual system controllers are standard on the Sun Fire 6800. |
Internal Mass Storage |
Sun StorEdge[tm] D240 Media Tray | A 2U-high, rack-mounted unit into which two UltraWide SCSI3 disk drive, and one DVD drive and one DDS4 tape drive can be fitted. The DVD and DDS4 devices can be replaced by extra disk drives if required. Up to 2 - D240 trays can be installed into the Sun Fire 4800/4810 cabinet. |
Power Supplies |
The Sun Fire 3800-6800 server family can be configured with N"4" redundant DC bulk power supplies, which are hot swappable. The DC bulk power supplies provide power for all of the Sun Fire 3800-6800 systems' internal requirements, on a load-shared 48VDC power bus. The base package comes with 2 power supplies. | |
Environment |
AC input | 200 - 240 VAC, 47 - 63 Hz, 16A at 208 VAC for each power cord (2+1 redundancy)(maximum) |
| Input power | 3,120 W | |
| Heat output | 10,625 BTU/hr | |
| Temperature | Optimal: 21° C to 23° C (70° F to 73.5° F) | |
| Operating: 5° C to 35° C (41° F to 95° F) - derate 2° C for every 1 km up to 3 km | ||
| Nonoperating: -20° C to 60° C (-4° F to 140° F) | ||
| Humidity | Optimal: 45% to 50% relative humidity | |
| Operating: 20% to 80% relative humidity, noncondensing | ||
| Nonoperating: 5% to 93% relative humidity, noncondensing | ||
| Altitude | Operating: 3000 m (10,000 ft.) | |
| Nonoperating: 12,000 m (40,000 ft.) | ||
| Acoustic noise | 69 dB(A) | |
| Vibration | Operating: 0.15 G, 5 to 500Hz, swept sine | |
| Nonoperating: 0.6 G, 5 to 500Hz, swept sine, vertical | ||
| 0.3 G, 5 to 500Hz, swept sine, horizontal | ||
| Shock | Operating: 3 G, 11 ms, half sine | |
| Number of cords | Deskside: 3 | |
| Rack Mounted: See specific rack information in Components area of the Sun System Handbook | ||
RegulationsMeets or exceeds the following requirements: |
Safety | UL 1950, CSA C22.2 950, TUB EN60950, CB Scheme (Worldwide Deviation) |
| RFI/EMI | FCC Class A, ICES 003 Class A, DOC Class A, EN55022 Class A, VCCI Class A, BSMI Class A, EN61000-3-2 & EN61000-3-3 | |
| Immunity | EN55024, EN50082-1 | |
Dimensions and Weights |
Height | 36.75 in, 93.4 cm |
| Width | 17.56 in, 44.6 cm | |
| Weight | 290 lbs, 132 kg | |
Buy, sell and upgrade used and refurbished Sun Fire 4810 servers, along with the rest of the Sun server family, at World Data Products.
Other Sun Products Available at WDPI
