Used and Refurbished HP Integrity rx5670 Servers
HP Integrity has been setting the standard in UNIX computing for years, and the HP Integrity rx4640 is no exception. The 4U rx4640 will fit perfectly into an HP rack while giving you the processing power and reliability you need for mission critical processes. Take advantage of the Intel Itanium 2 processors, 128 GB of memory, and 292 GB of storage for maximum capacity.
 | HP Integrity rx5670 Features |  |
|---|
Supported Processors |
1.3-GHz Intel® Itanium® 2 processor | Cache 3 MB |
| 1.5-GHz Itanium 2 processor | Cache 6 MB | |
System Memory |
Minimum memory | 1 GB |
| Maximum memory capacity | 96 GB | |
Internal Disks |
Max. disk mechanisms | 4 |
| Max. disk capacity | 438 GB | |
Standard Integrated I/O |
Ultra160 SCSI-LVD | Yes |
| 10/100/1000Base-T | Yes | |
| (RJ-45 connector) | ||
| RS-232 serial ports (multiplexed from DB-25 port) | 3 | |
| 10/100Base-T management port (RJ-45 connector) | Yes | |
I/O buses and slots |
Total PCI X and PCI Slots | 10 |
| 3 133 MHz, 64 bit slots on 3 dedicated PCI X buses | ||
| 6 66 MHz, 64 bit slots distributed on 3 PCI X buses; 2 slots per bus | ||
| 1 33 MHz, 32 bit PCI slot; recommended for graphics card | ||
Maximum I/O Cards |
Mass Storage | 9-10 |
| LAN | 10 | |
| WAN | 10 | |
| Multi-Function (Mass Storage / LAN) | 10 | |
| Additional Interface Cards | 2-10 | |
Electrical Characteristics |
AC Input power | 100 240V 50/60 Hz |
| Hotswap Power supplies | 2 included, 3rd for N+1 | |
| Redundant AC power inputs | 2 included, 3rd for N+1 | |
| Typical current requirements at 230V | 5 A (shared across inputs) | |
| Typical maximum power dissipation | 952 Watts | |
| Theoretical maximum power dissipation | 2,089 Watts | |
| Power factor at full load | 0.98 | |
| Typical Heat dissipation (BTUs/hour) | 3250 | |
| Maximum Heat dissipation (BTUs/hour) | 7135 | |
Site Preparation |
Site planning and installation included | No |
| Depth (in/mm) | 30.5 in (774 mm) | |
| Width (in/mm) | 19 in (482 mm) | |
| Rack Height (EIA/in/mm) | 7 U/12.25 in/322 mm | |
| Pedestal Height (in/mm) | 14.5 in (368 mm) | |
| Weight (lb/kg) Maximum | 160 lb (73 kg) | |
Environmental Characteristics |
Acoustics (operator/bystander) | <7.5 Bels LwA |
| at 77° F/25° C) | ||
| Operating Temperature | 41° to 95° F (5° to 35° C) | |
| (up to 5000 ft/1524 m* | ||
| Non-operating Temperature | -40° to 158° F (-40° to 70° C) | |
| Maximum rate of temperature change | 50° F (10° C)/hour | |
| Operating relative humidity | 15% to 80% RH non-condensing | |
| Non-operating relative humidity | 5% to 90% non-condensing | |
| Operating altitude above sea level | 1,0000 ft (3,000 m) maximum | |
| Non-operating altitude above sea level | 1,5000 ft (4,600 m) maximum | |
Regulatory Compliance |
Electromagnetic Interference | Complies with FCC Rules and Regulations, Part 15 as a Class A digital device. Manufacturer's Declaration to EN55022 Level A, VCCI Registered, Class A, Korea RLL |
| Safety | UL Listed, CSA Certified, TUV GS Mark compliant with EN 60950 and EN 41003 |
Each refurbished rx5670 server goes through World Data Products' rigorous Total Quality Process, comes with a 30-day warranty and qualifies for manufacturer's maintenance. World Data Products also has HP Integrity rx5670 repair on-site, so you can extend the lifecycle of your existing rx5670 servers. Get the best value for your money at World Data Products when purchasing used HP Integrity rx5670 servers and upgrades.
Buy, sell and upgrade used and refurbished HP Integrity rx5670 Servers, along with the rest of the Dell PowerEdge family, at World Data Products.