Used and Refurbished HP Integrity rx1600 Servers
HP Integrity has been setting the standard in UNIX computing for years, and the HP Integrity rx1660 is no exception. The 2U rx1660 will fit perfectly into an HP rack while giving you the processing power and reliability you need for mission critical processes. Take advantage of the 1.0 GHz Itanium 2 processor, 16 GB of memory, and 600 GB of storage for maximum capacity.
![]() | HP Integrity rx1600 Features | ![]() |
|---|
Supported Processors |
1.0-GHz Low-voltage Itanium 2 processor | Cache 1.5 MB |
System Memory |
Minimum memory | 512 MB |
| Maximum memory capacity | 16 GB | |
Internal Disks |
Max. disk mechanisms | 2 |
| Max. disk capacity | 600 GB | |
Standard Integrated I/O |
Ultra320 SCSI-LVD | 2 Channels |
| 10/100/1000Base-T (RJ-45 connector) | 1 Port | |
| 10/100Base-T (RJ-45 connector) | 1 Port | |
| RS-232 serial ports | 1 | |
| 10/100Base-T management port (RJ-45 connector) | Optional | |
| VGA graphics | Optional | |
| USB 2.0 | 2 | |
I/O Buses and Slots |
Total PCI X/PCI Slots; one full length, one shorter length slot (accommodates cards up to 7.5") Both slots are 133-MHz, 64-bit slots on dedicated PCI-X | 2 |
Maximum Mass Storage Host Bus Adapters |
Ultra160 SCSI-LVD | 1 |
| Dual-port Ultra160 SCSI-LVD | 1 | |
| Smart Array Ultra320 SCSI RAID | 1 | |
| 2-Gb single-port fibre channel | 2 | |
Maximum Network Interface Cards |
1000Base-SX | 2 |
| 1000Base-TX | 2 | |
| 10/100Base-TX | 2 | |
| Dual-port X.25 | 2 | |
| 4-port 10/100 Base-TX | 2 | |
| Dual-port GigE-TX | 2 | |
| Dual-port GigE-SX | 2 | |
Electrical Characteristics |
AC Input power | 100-240V 50/60 Hz |
| Max. input power | 500W | |
| Typical input power | 370W | |
| Max. input current | 6A@100Vrms & 3A@200Vrms | |
| Typical BTU | 1165 | |
Site Preparation |
Rack depth (in/mm) | 26.8 in (680 mm) |
| Rack height (in/mm) | 3.4 in (86mm) | |
| Rack width (in/mm) | 19 in (482mm) | |
| Minimum standalone configuration | 29 lb (13.2 kg) | |
| Maximum standalone configuration | 31 lb (14.1 kg) | |
| Minimum rack configuration | 31 lb (14.1 kg) | |
| Maximum rack configuration | 33 lb (15.0 kg) | |
Environmental Characteristics |
Acoustics at 25°C(operator/bystander) | 7.1 Bels LwA |
| Operating Temperature | 32° to 95° F (0° to 35° C) | |
| Non-operating Temperature | -40° to 158° F (-40° to 70° C) | |
| Maximum rate of temperature change | 68° F/hour (20° C/hour) w/disc media | |
| Operating relative humidity | 15% to 80% RH non-condensing | |
| Non-operating relative humidity | 8% to 85% non-condensing | |
| Operating altitude above sea level | 10,000 ft (3000 m) max | |
| Non-operating altitude above sea level | 4,572 m (15000 ft) max | |
Regulatory Compliance |
RMN | RSVLA-0302 |
| Electromagnetic interference | Complies with FCC Rules and Regulations, Part 15 as a Class A digital device. Manufacturer's Declaration to EN55022 Level A, VCCI Registered, Class A, Korea RLL | |
| Safety | CSA Certified, IEC 60950-1 |
Each refurbished rx1600 server goes through World Data Products' rigorous Total Quality Process, comes with a 30-day warranty and qualifies for manufacturer's maintenance. World Data Products also has HP Integrity rx1600 repair on-site, so you can extend the lifecycle of your existing rx1600 servers. Get the best value for your money at World Data Products when purchasing used HP Integrity rx1600 servers and upgrades.
Buy, sell and upgrade used and refurbished HP Integrity rx1600 Servers, along with the rest of the Dell PowerEdge family, at World Data Products.















