Used and Refurbished HP 9000 rp4410 Servers
HP 9000 has been the standard in UNIX computing for years, and the HP 9000 rp4410 is no exception. The 4U rp4410 server will fit perfectly into an HP rack or can be converted to a tower server when you request the pedestal kit for rp4400 series servers. Either way, the rp3410 will give you the processing power and reliability you need for mission critical processes. Take advantage of the PA-8900 processor modules, 128 GB of memory, and 600 GB of storage for maximum capacity.
 |
HP 9000 rp4410 Features |  |
|---|
Supported Processors |
Two-Core 800 MHz PA 8900 Processor Module | Cache Level 1 3MB (1.5 MB per core) Cache Level 2 64MB (shared between cores) |
| Two-Core 1 GHz PA 8900 Processor Module | Cache Level 1 3 MB(1.5 MB per core) Cache Level 2 64MB (shared between cores) |
|
System Memory |
Minimum memory (HP-UX 11i v3 requires min 2 GB) | 1 GB |
| Maximum memory capacity | 128 GB | |
Internal Disks |
Maximum disk mechanisms | 3 |
| Maximum disk capacity | 600 GB | |
Standard Integrated I/O |
Dual port Ultra320 SCSI-LVD | 2 channel |
| 10/100/1000Base T (RJ 45 connector) | 2 port 3 | |
| RS-232 serial ports | 3 | |
| 10/100Base-T management port (RJ-45 connector) | 1 port | |
| USB 2.0 | Yes | |
I/O Buses and Slots |
Available PCI X slots | 6 |
| 2 133 MHz, 64 bit slots on dedicated PCI X buses | ||
| 4 66 MHz, 64 bit slots distributed on 2 PCI X buses; 2 slots per bus | ||
Maximum I/O Cards |
Mass Storage | 1-6 |
| LAN | 6 | |
| WAN | 6 | |
| Multi-Function (Mass storage /LAN) | 6 | |
| Additional Interface Cards | 1-6 | |
Electrical Characteristics |
AC Input power | 200-240V 50-60 Hz |
| Hot swap power supplies | 1 included, 2nd for N+1 | |
| Redundant AC power inputs | 1 included, 2nd for N+1 | |
| Current requirements at 230V | 5.58 A (shared across inputs) | |
| Typical maximum power dissipation | 1065 Watts | |
| Conservative maximum power dissipation | 1368 Watts | |
| Power factor at full load | 0.95 or higher | |
| Typical heat dissipation (BTUs/hour) | 3600 | |
| Maximum heat dissipation (BTUs/hour) | 5500 | |
Site Preparation |
Rack depth (in/mm) | 25.2 in (639 mm) |
| Rack width (in/mm) | 17.32 in (440 mm) | |
| Rack height (in/mm/EIA) | 6.87 in (174 mm/4 U) | |
| Rack weight (lbs/kg) Max. | 96 lbs (43.55 kg) | |
| Stand mounted depth (in/mm) | 27.36 in (95 mm) | |
| Stand mounted width (in/mm) | 10.27 in (261 mm) | |
| Stand mounted height (in/mm) | 20.9 in (530 mm) | |
| Stand mounted weight (lbs/kg) | 111 lbs (504 kg) | |
Environmental Characteristics |
Acoustics (operator/bystander) at 25°C | <7.2 Bels LwA |
| Operating Temperature (up to 5000 ft) * | +5 to +35 C | |
| Non-operating Temperature | -40 to +70 C | |
| Maximum rate of temperature change | 10 C/hour | |
| Operating relative humidity | 15% to 80% RH non cond. | |
| Non-operating relative humidity | 5% to 90% non condensing | |
| Operating altitude above sea level | 3000 m (10000 ft) max | |
| Non-operating altitude above sea level | 4600 m (15000 ft) max | |
Regulatory Compliance |
RMN | RSVLA-0201 |
| Electromagnetic interference | Complies with FCC Rules and Regulations, Part 15 as a Class A digital device. Manufacturer's Declaration to EN55022 Level A, VCCI Registered, Class A, Korea RLL | |
| Safety | UL Listed, CSA Certified, TUV GS Mark compliant with EN 60950 and EN 41003 |
Each refurbished rp4410 server goes through World Data Products' rigorous Total Quality Process, comes with a 30-day warranty and qualifies for manufacturer's maintenance. World Data Products also has HP 9000 rp4410 repair on-site, so you can extend the lifecycle of your existing rp4410 servers. Get the best value for your money at World Data Products when purchasing used HP 9000 rp4410 servers and upgrades.
Buy, sell and upgrade used and refurbished HP 9000 rp4410 Servers, along with the rest of the Dell PowerEdge family, at World Data Products.
Other Hewlett-Packard Products Available at WDPI
