Cisco Catalyst WS-C3560G-48TS-S Ethernet Switch
Cisco's WS-C3560G-48TS-S is equiped with many security features to keep your network safe from intruders. Among these security features are unknown unicast and multicast port blocking that allows tight control by filtering packets that the switch has not already learned how to forward, and bidirectional data support on the Switched Port Analyzer (SPAN) port allows the CISCO Secure Intrusion Detection System (IDS) to take action when an intruder is detected. See other product secutiry features below.
World Data Products, Inc. (WDPI) will provide you with the best pricing on all new-in-box, used and refurbished Cisco Catalyst WS-C3560G-48TS-S switches. Next day delivery and industry leading one-year warranties on all Cisco hardware are two of the many value-added services WDPI can offer you to make your next hardware buying experience a satisfying one. Also, ask us about our third-party maintenance agreements and repair services.
 |
Catalyst 3560 WS-C3560G-48TS-S 10/100/1000Mbps Switch |  |
|---|
Product Description |
Cisco Catalyst 3560 WS-C3560G-48TS-S 10/100/1000Mbps switch. 48 Ethernet 10/100/1000 ports and 4 SFP-based gigabit Ethernet ports. Up to 12,000 MAC address table. 128 MB DRAM & 32 MB flash memory buffer. |
Brand / Series |
CISCO Catalyst 3560 |
Model |
WS-C3560G-48TS-S |
Standards |
IEEE 802.1s IEEE 802.1w IEEE 802.1x IEEE 802.3ad IEEE 802.3af IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T ports IEEE 802.1D Spanning Tree Protocol IEEE 802.1p CoS Prioritization IEEE 802.1Q VLAN IEEE 802.3 10BASE-T specification IEEE 802.3u 100BASE-TX specification IEEE 802.3ab 1000BASE-T specification IEEE 802.3z 1000BASE-X specification 1000BASE-X (SFP) 1000BASE-SX 1000BASE-LX/LH 1000BASE-ZX 1000BASE-CWDM SFP 1470 nm 1000BASE-CWDM SFP 1490 nm 1000BASE-CWDM SFP 1510 nm 1000BASE-CWDM SFP 1530 nm 1000BASE-CWDM SFP 1550 nm 1000BASE-CWDM SFP 1570 nm 1000BASE-CWDM SFP 1590 nm 1000BASE-CWDM SFP 1610 nm RMON I and II standards SNMPv1, SNMPv2c, and SNMPv3 |
Ports |
48 Ethernet 10/100/1000 ports and 4 SFP-based Gigabit Ethernet ports |
Speed |
10/100/1000Mbps |
MAC Address Table |
up to 12,000 |
Buffer Memory |
128 MB DRAM 32 MB Flash memory |
Security |
IEEE 802.1x allows dynamic, port-based security, providing user authentication. IEEE 802.1x with VLAN assignment allows a dynamic VLAN assignment for a specific user regardless of where the user is connected. IEEE 802.1x with voice VLAN permits an IP phone to access the voice VLAN irrespective of the authorized or unauthorized state of the port. IEEE 802.1x and port security are provided to authenticate the port and manage network access for all MAC addresses, including those of the client. IEEE 802.1x with an ACL assignment allows for specific identity-based security policies regardless of where the user is connected. IEEE 802.1x with Guest VLAN allows guests without 802.1x clients to have limited network access on the guest VLAN. CISCO security VLAN ACLs (VACLs) on all VLANs prevent unauthorized data flows from being bridged within VLANs. CISCO standard and extended IP security router ACLs (RACLs) define security policies on routed interfaces for control- and data-plane traffic. Port-based ACLs (PACLs) for Layer 2 interfaces allow application of security policies on individual switch ports. Unicast MAC filtering prevents the forwarding of any type of packet with a matching MAC address. Unknown unicast and multicast port blocking allows tight control by filtering packets that the switch has not already learned how to forward. SSHv2, Kerberos, and SNMPv3 provide network security by encrypting administrator traffic during Telnet and SNMP sessions. SSHv2, Kerberos, and the cryptographic version of SNMPv3 require a special cryptographic software image because of U.S. export restrictions. Private VLAN provides security and isolation between switch ports, helping ensure that users cannot snoop on other users' traffic. Bidirectional data support on the Switched Port Analyzer (SPAN) port allows the CISCO Secure Intrusion Detection System (IDS) to take action when an intruder is detected. |
Cabling |
10BASE-T ports: RJ-45 connectors, two-pair Category 3, 4, or 5 unshielded twisted-pair (UTP) cabling 10BASE-T PoE ports: RJ-45 connectors, two-pair Category 3, 4, or 5 UTP cabling power pins 1,2 (negative) and 3,6 (positive) 100BASE-TX ports: RJ-45 connectors, two-pair Category 5 UTP cabling 100BASE-TX PoE ports: RJ-45 connectors, two-pair Category 5 UTP cabling, power on pins 1,2 (negative) and 3,6 (positive) 1000BASE-T ports: RJ-45 connectors, four-pair Category 5 UTP cabling 1000BASE-T SFP-based ports: RJ-45 connectors, four-pair Category 5 UTP cabling 1000BASE-SX, -LX/LH, -ZX, and CWDM SFP-based ports: LC fiber connectors (single/multimode fiber) CISCO Catalyst 3560 SFP Interconnect Cable: two-pair shielded cabling, 50 cm Management console port: RJ-45-to-DB-9 cable for PC connections; for terminal connections, use RJ-45- to-DB-25 female data-terminal-equipment (DTE) adaptor (can be ordered separately from CISCO; part number ACS-DSBUASYN=) |
LEDs |
Per-port status LEDs: Link integrity, disabled, activity, speed, full-duplex indications, PoE applied, PoE error, and PoE disabled indications System-status LEDs: System, RPS, link status, link duplex, link speed, and PoE indications |
VLAN Support |
Yes |
Power |
100–240 VAC (autoranging), 3.0–1.5A, 50–60Hz |
Dimensions |
17.5" x 16.1" x 1.7" |
Weight |
14 lbs. |
Temperature |
0ºC to 45ºC (32ºF to 113ºF) |
Humidity |
10 to 85% (noncondensing) |
Features |
1RU fixed-configuration, multilayer switch Enterprise-class intelligent services delivered to the network edge IP Base license (formerly SMI) installed Basic RIP and static routing, upgradeable to full dynamic IP routing Advanced QoS Granular Rate Limiting |
